Tag alle, wollte mal hier noch auf mein neuer Mode hier aufmerksam machen, da die Xiaomi Entwickler ja recht faul sind um uns etwas freiraum zu lassen.
Kurz erklaert: Ximode sind mehrere Scripts, die ohne App oder sonstiges aufrufbar sind. Dies geschieht durch das Drücken des Einschaltbutton. Einmal drücken wird das erste Script geladen, zweimal das zweite usw. ...
Da ich alles aber über das Dashcam forum leite Copy&Paste ich hier mal alles auf ENGLISH rein, da mich dies schon 4 Tage gekostet hat. D.h wenn jemand auf deutsch übersetzen will, bitte danke. ;)
#################################################################################################################################################
XIMODE - Video&photo modes BUNDLE
VERSION: 1.0
AUTHOR: Tanckom
BITRATE: 35Mbps (all HQ formats) - please use Custom 35Mbit Firmware by Fried
MODES:
Auto (Nothing touched, except the bitrate, deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
Normal (Mode for daylight/everyday usage, clean and sharp videos, auto scene mode (1), deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
Night (Mode for night filming, added noise reduction to 5120, added sharpness (coring), set saturation/vibrance to overaverage, landscape scene mode (13), deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
Yitune (Mode for filming with as less as possible compression and preset footages, low vibrance/saturation, low sharpness, low contrast, perfect for users who want to edit their videos, deleting THM files, 4GB files, RAW+JPEG, JPEG 100% - based on Yimax by nutsey)
GoPro's equivalent: Protune
SupYiView (Mode for immersive wide angle perspective, captures 1600x1200p60 4:3 videos and stretches it to 1920x1080p60 16:9 videos, uses the height of the camera's sensor that you get with 4:3 meaning that you will see more of the sky and ground assuming you are pointed at the horizon
,deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
GoPro's equivalent: Superview
Custom (Add your own script, deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
INSTALLATION:
Extract the file XIMODE.zip
Place the "autoexec.ash" file on the root of your SD-CARD (top direction of SD-CARD)
!NOT INSIDE FOLDERS!
Place the "SCRIPTS" and "XCORING" folder on the root of your SD-CARD (top direction of SD-CARD)
!NOT INSIDE FOLDERS!
Place the "RAW_to_DNG_converter" on the root of your SD-CARD (top direction of SD-CARD).
HOW TO USE:
Click and hold the shutter button (top button to start filming etc.)
Now start the camera with the front power button. (keep holding the shutter button)
After the front LED has stopped blinking (reading process finished), the top small red LED near the shutter button should light up. (keep holding the shutter button)
Now press within 6 seconds the front power button to choose the script.
Each time a "click/press" has been registered, the WIFI LED will light one time up (blue LED on the side)
Press once -> XIMODE-NORMAL will be loaded
Press twice -> XIMODE-NIGHT will be loaded
Press three times -> XIMODE-YITUNE will be loaded
Press four times -> XIMODE-SupYiView will be loaded
Press five times -> XIMODE-CUSTOM will be loaded
When done, NOW you can stop holding the shutter button.
The front LED starts to blink and the device will reboot.
Now wait about 10seconds, don't press any further buttons, the device will reboot, and load
AUTO SCRIPT + YOUR CHOSEN SCRIPT, which will overwrite the autoscript. (That's why you'll
find in autoexec.ash the auto and the chosen script).
The long beep indicates that the script has been loaded, and the amount of flashing times of
the front LED indicates which script has been loaded.
SOURCE/THANKS:
nutsey Yimax and his blog
PJanisio Githup rep.
gente updated scripts
Fried Custom 1.2.13 35Mbit firmware
Halvabrosch ash.booter
strAvus clean recording
WaffleFPV SuPoorView
Dashcamtalk society
BUCKETLIST TO ADD ON NEXT UPDATE:
Adding night timelapse script
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
VIDEO SAMPLES WILL FOLLOW - CURRENTLY ONLY HAVING ROAMING INTERNET
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
What is Ximode?
Ximode is a tool, that add's the missing modes for the Xiaomi Yi, as the auto, normal, night, and other preset modes to enhance your recording and shooting moments.
Ximode is can be used without the official Xiaomi app, and the modes are choosed by pressing at start the front button only once, twice, three times etc. .
Why Ximode?
Ximode is a script which has only to be placed on your SD-Card, and you're good to go for your next shootings and recording without any additional scriptings. It's main target was to create a script which the user can use directly without further scripting knowledge and recieve all necessery modes to feel the "action-cam" magic.
Why Ximode was created?
When i first recieved the Xiaomi Yi, i got the feeling that the developpers were lazy and set the cam to auto mode, so the user simply records his video and pictures. However that's in my opinion not how you deliver a camera to a customer. I've been working for over 8 years with LQ and HQ cameras, am using Sony Vegas Pro and Adobe After Effects for postproductions and Paint.net, Gimp and Photoshop to edit pictures.
Due my experience and the lack of modes for the Xiaomi Yi, i created out of several excellent scripts this complete package, which can be used fresh out of the box.
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
PLEASE DON'T ASK HOW TO CHANGE SETTINGS, THIS HAS BEEN ANSWERED MANY TIMES IN THE FORUM
FINAL PRODUCT HAS BEEN RELEASED
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Lasst mich wissen wenns was zu updaten gibt :)
VIEL SPASS :D
Ich sag einfach mal: Danke! Krasses Ding! :D
Liest sich sehr gut. Werde es wohl mal auf die Karte hauen und ausprobieren müssen.
Kein ding, feedback wäre nett ;)
UPDATED
XIMODE - Video&photo modes BUNDLE for Xiaomi Yi Action Cam
VERSION: 1.0
AUTHOR: Tanckom
BITRATE: 35Mbps (all HQ formats) - please use Custom 35Mbit Firmware by Fried
MODES:
Autol (Nothing touched, except the bitrate, deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
Normal (Mode for daylight/everyday usage, clean and sharp videos, auto scene mode (1), deleting THM files, RAW+JPEG, JPEG 100%)
Normal (HDR filming mode with good saturation and contrast settings. Can be used without any additional video editing.Mode for daylight/everyday usage, clean and sharp videos, auto scene mode (1), deleting THM files, RAW+JPEG, JPEG 100%)
Night (Mode for night filming, added noise reduction to 5120, added sharpness (coring), set saturation/vibrance to overaverage, landscape scene mode (13), deleting THM files, RAW+JPEG, JPEG 100%)
Yitune (Mode for filming with as less as possible compression and preset footages, low vibrance/saturation, low sharpness, low contrast, perfect for users who want to edit their videos, deleting THM files, RAW+JPEG, JPEG 100% - based on Yimax by nutsey)
GoPro's equivalent: Protune
SupYiView (Mode for immersive wide angle perspective, captures 1600x1200p60 4:3 videos and stretches it to 1920x1080p60 16:9 videos, uses the height of the camera's sensor that you get with 4:3 meaning that you will see more of the sky and ground assuming you are pointed at the horizon
,deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
GoPro's equivalent: Superview
Nightlapse (Mode for timelapse photography in dark/night surroundings. Shutterspeed is set to 7.9 seconds, ISO is at 100 and Gain at 0.)
Custom (Add your own script, deleting THM files, 4GB files, RAW+JPEG, JPEG 100%)
INSTALLATION:
Extract the file XIMODE.zip
Place the "autoexec.ash" file on the root of your SD-CARD (top direction of SD-CARD)
!NOT INSIDE FOLDERS!
Place the "SCRIPTS" and "XCORING" folder on the root of your SD-CARD (top direction of SD-CARD)
!NOT INSIDE FOLDERS!
Place the "RAW_to_DNG_converter" on the root of your SD-CARD (top direction of SD-CARD).
HOW TO USE:
Click and hold the shutter button (top button to start filming etc.)
Now start the camera with the front power button. (keep holding the shutter button)
After the front LED has stopped blinking (reading process finished), the top small red LED near the shutter button should light up. (keep holding the shutter button)
Now press within 6 seconds the amount of times the front power button to choose the script.
Each time a "click/press" has been registered, the WIFI LED will light one time up (blue LED on the side)
Press once -> XIMODE-AUTO will be loaded
Press twice -> XIMODE-NORMAL will be loaded
Press three times -> XIMODE-NIGHT will be loaded
Press four times -> XIMODE-YITUNE will be loaded
Press five times -> XIMODE-SupYiView will be loaded
Press six times -> XIMODE-NIGHTLAPSE will be loaded
Press seven times -> XIMODE-CUSTOM will be loaded
After the x-pressed times, NOW you can stop holding the shutter button.
The front LED starts to blink and the device will reboot.
Now wait about 10seconds, don't press any further buttons, the device will reboot, and load
AUTO SCRIPT + YOUR CHOSEN SCRIPT, which will overwrite the autoscript. (That's why you'll
find in autoexec.ash the auto and the chosen script).
The long beep indicates that the script has been loaded, and the following amount of flashing times of
the front LED indicates which script has been loaded.
INFO: Everytime when the device is started normally, it loads the previously
selected mode.
F.ex: You selected mode 2 and turned the camera off. When simply starting the camera with only the power button, it will directly load mode 2.
The holding of shutter button tells the device to count the pressed times to select mode.
SOURCE/THANKS:
nutsey Yimax and his blog
PJanisio Githup rep.
gente updated scripts
Fried Custom 1.2.13 35Mbit firmware
Halvabrosch ash.booter
strAvus clean recording
WaffleFPV SuPoorView
Dashcamtalk society
BUCKETLIST TO ADD ON NEXT UPDATE:
Adding night timelapse script ( Beta version in process)
If somebody knows how to create .apk and connect the Xiaomi Yi via realtime to it, please hit me up. (I know some russian guy here is on it, however there are no updates from him)
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
VIDEO SAMPLES WILL FOLLOW - CURRENTLY ONLY HAVING ROAMING INTERNET
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
What is Ximode?
Ximode is a tool, that add's the missing modes for the Xiaomi Yi, as the auto, normal, night, and other preset modes to enhance your recording and shooting moments.
Ximode can be used without the official Xiaomi app, and the modes are choosed by pressing at start the front button only once, twice, three times etc. .
Why Ximode?
Ximode is a script which has only to be placed on your SD-Card, and you're good to go for your next shootings and recording without any additional scriptings. It's main target was to create a script which the user can use directly without further scripting knowledge and recieve all necessery modes to feel the "action-cam" magic.
Why Ximode was created?
When i first recieved the Xiaomi Yi, i got the feeling that the developpers were lazy and set the cam to auto mode, so the user simply records his video and pictures. However that's in my opinion not how you deliver a camera to a customer. I've been working for over 8 years with LQ and HQ cameras, am using Sony Vegas Pro and Adobe After Effects for postproductions and Paint.net, Gimp and Photoshop to edit pictures.
Due my experience and the lack of modes for the Xiaomi Yi, i created out of several excellent scripts this complete package, which can be used fresh out of the box.
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
PLEASE DON'T ASK HOW TO CHANGE SETTINGS, THIS HAS BEEN ANSWERED MANY TIMES IN THE FORUM
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
UPDATE - LOG
1.0.1 - Edited scripts. Added nightlapse and custom. Auto-mode is now the first mode. All other modes have been placed one level up. Overall update for better GUI, understanding and description. 4GB script updated!
1.0. - First release.
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Please let me know how i could improve the scripts.
Kurze Frage.
Besteht die Möglichkeit, einen bestimmten Mode per Default beim Einschalten starten zu lassen, ohne dass man Buttons drücken muss?
Kann man für diesen Zweck irgendwo im Script was editieren oder austauschen?
UPDATE:
Hab Ximode jetzt komplett erneurt un XYC integriert :)
Das ganze wird dann auf meiner Website angeboten, wo alles up2date bleibt :)
Ximode video mode xiaomi yi
Hallo, ja also alles vorherigen scripts werden immer geladen, d.h. solange du kein anderes script auswählst, bleibt das vorherrige erhalten.
Wenn du custom scripts einfügen willst, gibt es am ende zwei scripts die du editieren kanns :)
Tanckom, soweit habe ich es ja verstanden.
Aber kann man für den ersten Start, also für das normale Einschalten der Cam, ein bestimmtes Script automatisch per Default laden lassen, ohne die Buttons drücken zu müssen?
Tanckom, auf deiner Seite hast du im Hintergrund ein Bild einer Meeresschildkröte.
Kannst du zufällig eine Empfehlung für Unterwasseraufnahmen geben? Normal Mode? Night Mode?
Tanckom, soweit habe ich es ja verstanden.
Aber kann man für den ersten Start, also für das normale Einschalten der Cam, ein bestimmtes Script automatisch per Default laden lassen, ohne die Buttons drücken zu müssen?
Das hat er dir doch im Post davor beantwortet. Das letzte Script das du auswählst bleibt erhalten. Somit musst du dann keine Knöpfe mehr drücken sondern erst wenn du es wieder wechseln willst.